Removal spend in the following sequence:

- Reliably fix the car on an equal surface and remove a forward wheel;

- Release the holder of a brake hose and connecting bar on the stabilizer;

Fig. 246. Removal brake скобы a forward brake: 1 — protective caps; 2 — bolts

- Turn away bolts 2 (fig. 246) fastenings brake скобы, preliminary having removed protective caps 1;

- Take away скобу aside and fix a wire on a wheel arch (the brake hose should not be bent);

- Turn away a nut of fastening of a tip of steering draught;

- Remove a tip of steering draught by means of a stripper. At this operation protect a rubber cover from damage by a soft fabric;

- Consolidation of a spherical support of the bottom cross-section bar close a soft fabric for protection against damages;

- Remove the bottom spherical support as it is described above;

- Turn away bolts of fastening of a rotary fist;

- Remove a rotary fist with the help оправки;

- Take a drive of wheels aside and fix in a wheel arch.

- Prop up a rack, having protected it from damages;

Fig. 247. Nuts of fastening of the top support absorber racks

- Turn away a nut of fastening of the top support of a rack to a body (fig. 247) then lower a rack downwards and pull out through a wheel niche.