Installation spend in the following sequence:

- Establish a cross-section beam under the car bottom on a mobile jack and lift it;

Fig. 253. Installation of a cross-section beam

- Pay attention to that directing pins have entered into corresponding apertures on the body bottom (fig. 253);

- Wrap bolts of fastening of a cross-section beam the moment 115 Нм;

- Lift an exhaust pipe in gathering and fix on rubber suspension brackets;

- Establish the top lever;

- Establish the bottom cross-section lever;

- Establish the stabilizer of cross-section stability;

- After end of works check up and adjust corners of installation of wheels in a specialised workshop.