Ford Fokus>> Back suspension bracket>> The stabilizer of cross-section stability>> Installation of the stabilizer of cross-section stability
Fig. 260. An adjusting ledge of the plug
Plugs are put on the stabilizer without greasing. To facilitate their installation, moisten plugs with a solution for ware washing. At installation of plugs focus them so that ledges (arrow) (fig. 260
) were on the left side.
Installation spend to sequences, return to removal:
- Bolts tightening скоб wrap the moment 48 Н·м (top) and 18 Н·м (bottom);
- Bolts of the cross-section lever wrap the moment 15 Н·м;
- Establish the car on wheels;
- Press some times the car then measure height of the car to the earth from both parties. If the difference makes more than 5 mm, address on service centre Ford for updating.