Fig. 2. At performance of repair work it is impossible to smoke and use a lighter or matches

Fig. 3. Put on protective ear-phones at works on metal or the working engine

Fig. 4. Always put on goggles at drilling, grinding and metalwork works

Fig. 5. Working gloves will protect your hands from a dirt or grazes at contact with sharp edges

Fig. 6. Pay attention to ventilation of a repair hole. Steams of gasoline and exhaust gases Here can gather. At the working motor it is life-threatening

Fig. 7. At painting of the big surfaces it is necessary to put on a respirator. Provide thus good ventilation of a premise

Fig. 8. A spray, old oil, a brake liquid, or old brake колодки utilise in appropriate way. The used accumulators accept in special points of reception

Fig. 9. The burnt down safety locks are replaced new the same type or identical on a current strength

Fig. 10. At any works pay special attention on ignition system. At the working engine the system is under a high voltage — in a primary chain pressure reaches 30 000 In

At performance of repair work independently special attention give to safety elements. Count the forces, start working, which you have really seized. Not be self-confident in metalwork works in which at you was small or at all there was no practical experience. Carelessly carried out repairs can lead sooner or later to serious consequences — and, as a rule, not only for you, but also for others (a Fig. 2, 3, 4, 5, 6, 7, 8, 9, 10).