Ford Fokus>> Coupling>> Movement of the car with constantly included coupling
If coupling of your car has ceased to work as a result of leak of a working liquid from a hydrodrive to the nearest workshop it is possible to reach without using a coupling pedal.
For this purpose take advantage of following councils;
- Prior to the beginning of movement include 1st transfer and start up the engine a starter, your car will start to move on 1st transfer. If you do not wish to switch transfer to movement time can repeat all it, having begun movement with 2nd transfer;
- If you switch transfers on the move inclusion of 2nd transfer spend when turns of a cranked shaft become hardly more than 1000 mines-1. For this purpose gradually reduce pressing an accelerator pedal, deduce the gear change lever in neutral position and try to include 2 transfer. If inclusion is complicated, press slightly a pedal of an accelerator and release, having added thereby turns of a cranked shaft. It becomes that выравнить turns of a cranked shaft with turns of a gear wheel of corresponding transfer. The subsequent transfers include similarly.
- For a gear change downwards clean a foot from a pedal of an accelerator and deduce the gear change lever in neutral position. Cautiously increase turns of a cranked shaft, pressing a pedal of an accelerator and simultaneously press on the gear change lever, including the lowest transfer.