At removal and installation of the fuel pump will perform following works:

- Disconnect a wire of "weight" from the negative plug of the storage battery;

- Merge fuel from a tank and remove it under the car;

Fig. 189. Removal bringing and submitting топливопроводов

- Remove bringing and submitting топливопроводы, and also a contact socket from the fuel pump (fig. 189);

- Turn away a lock ring the special tool (Ford 23055) or by means of a punch and a hammer;

- Remove the fuel pump, for this purpose turn the pump counter-clockwise and take out from a tank. During it cautiously manage with a float and its lever;

- For pump installation necessarily use a new sealing ring under a lock ring of the pump

- At installation combine labels on a fuel tank and the pump;

Fig. 190. A special key for a lock ring

- Clear all condensed surfaces before to put the pump. A lock ring tighten the moment 80 Нм (fig. 190);

- Finish installation in sequence, return to removal;

- Connect "a weight" wire to the negative plug of the storage battery and include the pump on 30 with. Approximately so much time is necessary for restoration of normal pressure in system;

- Check up all connections on tightness.