Removal spend in the following sequence:

- Establish the car on the lift or steadily fix on supports;

- Remove the forward heat-shielding screen;

- Turn away a fastening nut каталитического neutralizer;

- Remove a back arm;

- Lower the car;

Fig. 319. Pipeline removal (the engine 1.8/2.0)

- Remove the pipeline (fig. 319);

- Remove the heat-shielding screen from a final collector;

Fig. 320. Removal of a contact socket from the gauge a ljambda-probe (the engine 1.8/2.0)

- Remove a contact socket from the gauge a ljambda-probe (fig. 320);

- Remove the gauge a ljambda-probe;

- Lift the car and steadily fix on racks;

- Remove каталитический neutralizer, for this purpose dismantle a forward keeping arm and remove a lining.

The prevention During dismantle of a keeping arm you should prop up the catalyst (fig. 321).

Fig. 321. Removal каталитического neutralizer (the engine 1.8/2.0)