Ford Fokus>> The power supply system>> The air filter>> Clearing of a filtering element
Clearing of a filtering element spend in a following order:
- Cautiously beat out about a firm substrate filtering element. So you remove large particles of a dust;
Fig. 194. Blow a filtering element from the inside outside. If you have noticed damages on a filter surface, replace it
- Blow the filter the compressed air from the inside outside. So you remove thin particles of a dust (fig. 194
- Never wash out filtering element water. A filter time will be hammered definitively;
- At installation of a filtering element always pay attention to that condensed surfaces remained pure.