Starter removal spend in a following order.

Cars with engines of 1,4-1,6 l

Disconnect a wire of "weight" from the negative plug of the storage battery;

- Remove a belt of a drive of auxiliary units as it is described earlier;

- Remove a protective cover from a generator wire;

- Separate a contact socket and remove a wire;

- Turn on from below fastening bolts;

- Turn on from above bolts of fastening and a nut;

- Remove the generator;

- Generator installation spend to sequences, return to removal;

- Bolts and nut wrap the moment 45 Нм;

- Tighten fastening of a wire by the moment 8 Нм.

Cars with engines of 1,8-2,0 l

Disconnect a wire of "weight" from the negative plug of the storage battery;

- Remove a belt of a drive of auxiliary units as it is described earlier;

- Remove a protective cover from a generator wire;

- Separate a contact socket and remove a wire;

- Turn away a bolt of fastening of a broad tank;

- Remove a broad tank from a clamp and take aside but so that the liquid did not follow;

- Remove a tank of the hydraulic booster of a steering and take aside so that the liquid did not follow;

- Disconnect a contact socket from the engine;

- Turn away bolts of fastening of the generator and remove it;

- Generator installation spend to sequences, return to removal;

- Wrap bolts of fastening of the generator the moment 25 Нм;

- Tighten a nut of fastening of a wire the moment 8 Нм.

Cars with diesel engines

Disconnect a wire of "weight" from the negative plug of the storage battery;

- Remove a belt of a drive of auxiliary units as it is described earlier;

- Uncover under the engine;

- Remove a protective cover from a generator wire;

- Turn away a nut of fastening of a wire and remove it.

The car with the conditioner

Remove the compressor of the conditioner and take aside;

Fig. 303. Fastening of an arm of a pulley of the generator

- Turn away bolts of an arm of a pulley of the generator (fig. 303);

Fig. 304. Removal of an adapter of the generator

- Remove a generator adapter, having weakened 3 bolts (fig. 304);

Fig. 305. Generator removal

- Turn away bolts of fastening of the generator and remove it (fig. 305);

- Generator installation spend to sequences, return to removal;

- Wrap bolts of fastening of the generator the moment 25 Нм and an adapter — 12 Нм.