The maintenance - Ford Focus
- Introduction
   1.1. HOW TO USE THE GIVEN REPAIR MANUAL
    1.2. THE WORKPLACE
    1.3. Recommendations about workshop visiting
   1.4. Safety — the main thing at repair
    1.5. The tool
    1.6. Councils of professionals at work with carving connection
    1.7. Lifting of the car by means of a jack
    1.8. Periodic service and care of the car
    1.9. A lineup of cars Ford Focus
   - 1.10. A choice of additional options
      1.10.1. The engines established on the car
      1.10.2. The engine of 1,4 l Zetec 16V working объемом1388 sm3 and capacity of 55 kw (75 h.p.)
      1.10.3. The engine of 1,6 l 16 V Zetec-SE in working volume 1596 sm3 and capacity of 74 kw (100 h.p.)
      1.10.4. The engine of 1,8 l 16V Zetec-E, working volume 1796 sm3 and capacity of 85 kw (115 h.p.)
      1.10.5. The engine of 2,0 l 16V Zetec-E in working volume 1988 sm3 and capacity of 96 kw (130 h.p.)
      1.10.6. The engine of 1,8 l Endura — a turbodiesel in working volume of 1753 sm3 and capacity of 55 kw (75 h.p.)
      1.10.7. The engine of 1.8 l Endura-DI — a turbodiesel in working volume of 1753 sm3 and capacity of 66 kw (90 h.p.)
   1.11. The chassis
   1.12. Identification on models
 2. Engines
 3. System of greasing of the engine
 4. Cooling system
 5. The power supply system
 6. Management of the power unit and the fulfilled gases
 7. Ignition system
 8. Coupling
 9. A transmission
 10. A drive of forward wheels
 11. A forward suspension bracket
 12. A back suspension bracket
 13. A steering
 14. Brake system
 15. An electric equipment
 16. System of release of the fulfilled gases
 17. Wheels and tyres
 The appendix
 Schemes of electric connections

Ford Fokus>> Introduction>> Choice of additional options>> The engine of 1,6 l 16 V Zetec-SE in working volume 1596 sm3 and capacity of 74 kw (100 h.p.)
Fig. 39. New engine Zetec-SE of 1,6 l capacity of 100 h.p. at 6000 mines-1



Constructive changes on the engine of 1.6 l Zetec-SE have been brought at installation on car Focus (a Fig. 39). Transition on легкосплавные knots has allowed to improve the twisting moment characteristic. The working volume of the engine has been increased. The maximum capacity of the engine is necessary on 6000 mines-1, the maximum twisting moment 145 Нм at 4000 mines-1.