The maintenance - Ford Focus
 Introduction
- 2. Engines
    2.1. Basic elements of a design of the engine
    2.2. Variants of engines Ford Focus
    2.3. Engine dismantling
   - 2.4. Installation of the power unit
      2.4.1. Installation of engine Zetec-SE of 1,4 1,6 l with a transmission
      2.4.2. Installation of engine Zetec-E of 1,8 2,0 l with a transmission
      2.4.3. Installation of engine Endura-DI of 1,8 l with a transmission
    2.5. Assemblage and engine dismantling
    2.6. The basic checks of details and engine knots
    2.7. Compression gauging
 3. System of greasing of the engine
 4. Cooling system
 5. The power supply system
 6. Management of the power unit and the fulfilled gases
 7. Ignition system
 8. Coupling
 9. A transmission
 10. A drive of forward wheels
 11. A forward suspension bracket
 12. A back suspension bracket
 13. A steering
 14. Brake system
 15. An electric equipment
 16. System of release of the fulfilled gases
 17. Wheels and tyres
 The appendix
 Schemes of electric connections

Ford Fokus>> Engines>> Installation of the power unit



Before installation of the power unit on the car collect a transmission with the engine, preliminary having greased шлицы a primary shaft with a thin layer of greasing of firm Bosch. Bolts of fastening of a transmission wrap the moment 40—50 Нм. Before installation of the power unit on the car reliably fix it on an assembly table by means of wooden wedges and couplers. In the further description of installation we recognise that your car is on the lift.